Velodyne WiConnect - Manual (Page 12)

www.velodyne.com 6 - WiConnect User’s Manual
SETUP #2: LESS COMMON (RECEIVER HAS NO LFE/SUB OUTPUT)
1. Use the two RcA cables supplied by you to connect the wireless transmitter’s R and l inputs to your
receiver’s R and l outputs.
2. Plug the wireless transmitter’s 5V dc power adaptor into the back of the wireless transmitter. Plug the
other end of the adaptor into a power outlet.
3. Go to the Select Receiver Options for Optimal Subwoofer Performance instructions next.
NOTE: The subwoofer must be within 50 feet (15 meters) from its transmitter to be able to receive the
wireless signal. Also, make sure that the same cHAnnel is selected on both the transmitter and subwoofer.