Velodyne WiConnect - Manual (Page 21)

www.velodyne.com WiConnect User’s Manual - 15
RESOURCES
Specifications
Model WiC-10
Woofer 10” downward firing (7.65” piston diameter)
Amplifier: Class D 200 Watts Dynamic, 125 Watts RMS Power
Magnet Structure 2 lbs. (0.9 Kg)
Frequency Response 33 Hz – 140 Hz (+/- 3 dB)
Voice Coil: 1.6” copper wound
Cone Coated fiber
Speaker-level Pass-through Full range
Low-Pass Crossover 50 Hz – 200 Hz
Phase 0° or 180 °
Auto On/Off Yes
Video Shielding Yes
Cabinet Design Bass-reflex with built-in power amplifier
Cabinet (H x W x D) (includes feet) 16” x 12” x 15.5” (40 cm x 30 cm x 39.5 cm)
Shipping Weight (approximate) 35 lbs. (16 Kg)
Wireless Transmitter Range 50’ (15 m)
Wireless Transmitter Frequency 2.4 GHz
Warranty (North America) 3 years electronics (parts and labor). 5 years driver (parts and labor)
Protection Circuitry
The subwoofer is equipped with protection circuitry to provide maximum performance with greatest reliability.
The subwoofer is protected against:
• Overdriving the speaker
• Overdriving the amplifier
• Overheating the amplifier
• Excessive drop in power line voltage
The overdrive protection circuitry operates constantly without being audible under most situations.
If the subwoofer should shut down, reduce the volume setting and shut the subwoofer off until it cools down.
The time the subwoofer takes to cool down depends on the ambient room temperature, but typically at least 10
minutes are required for the subwoofer to cool down and recover from the thermal shutdown.
Also, plug the unit into a different wall socket. Overloaded sockets or damaged home wiring circuits can cause
power voltage drops while the subwoofer is drawing high power levels. This condition can result in the subwoofer
shutting down intermittently.