Velodyne WiConnect - Manual (Page 18)

www.velodyne.com 12 - WiConnect User’s Manual
Mount Wireless Transmitter on Wall (Optional)
Optionally, you can mount the wireless transmitter on the wall or place in a location that better organizes your
audio components. The transmitter doesn’t have to be visually in view in the room to function properly.
1. Use the template below to mark the mounting locations on the wall. mark the two screw locations for
either the horizontal or vertical mounting orientation.
2. Hand turn one of the included self-tapping wood screws into each marked location. Tighten the screws
until about 1/8” (3.17mm) of the screw shank is exposed.
3. Hook two of the slotted holes on back of the wireless transmitter to the two screws. There is no right way
up for the transmitter. It can be mounted in any orientation.
NOTE: The provided wood screws aren’t suitable for stone or other hard wall surfaces. If you can’t hand drive
the screws, you may need to drill holes and provide other wall anchors.
Wireless Transmitter Mounting Template