Vermona DRM1 MKIII - analog drum synthesizer - Manual (Page 26)

25 VERMONA DRM1 MKIII - analog drum synthesizer
EN
Trigger-Inputs (optional)
You can purchase the DRM1 MKIII either with or without trigger-inputs.
The eight trigger-inputs allow triggering the DRM1 MKIII’s sound from an
analogue sequencer. The unit will accept gate signals between 2 and 12 volts.
Alternatively, the mode of operation can be switched by internal jumpers to the
use of switch-trigger. Note that this requires the unit to be opened which shall
only be performed by a Vermona authorized service technician or expert.
The analogue trigger-inputs do not respond to dynamic trigger signals. In this
scenario, all sounds of the DRM1 MKIII can only sound at a fixed volume.