Vermona DRM1 MKIII - analog drum synthesizer - Manual (Page 6)

5 VERMONA DRM1 MKIII - analog drum synthesizer
EN
Setup
Scope of delivery
To ensure top quality, we carefully inspected the DRM1 MKIII before packaging.
Nevertheless, the module could have been damaged during transportation.
Therefore, we ask you to take a serious look at the unit when unpacking. Do
not hesitate to contact us, should there be anything unusual with the unit or its
packaging.
You should find the following items in the box:
• the DRM1 MKIII
• a power chord
• this manual
• a big portion of fun
Connection and Startup
The DRM1 MKIII is a pure sound module. To make use of it, it needs to be
connected to a sequencer, a computer or keyboard as well as to a mixing desk
or an amplifier. After connecting the module to a power socket using the
supplied power chord, setup the audio- and MIDI-connections as follows:
Setting up audio connections
IMPORTANT CONNECT FIRST, AND THEN SWITCH ON! To protect
your speakers, your audio-interface and, last but not
least, your ears, we urgently recommend setting up all
cable connections while the equipment is switched off.
Do not underestimate level peaks and resulting possible
damage that could occur when plugging in or removing
audio cables.