Vortech 2003-2004 Mustang Mach 1 - Manual (Page 18)

P/N: 4FR020-010
©2004 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured
23AUG04 86-93 4V Mus. Cobra(4FR v3.1)
P/N: 4FR020-010
©2004 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured
23AUG04 86-93 4V Mus. Cobra(4FR v3.1)
6
8. MAIN BRACKET ASSEMBLY/DRIVE BELT
A. Attach the supplied 1/8" NPT x 45° flare fitting
and oil feed hose to the oil feed fitting on the su-
percharger. Rotate the fitting so that it points for-
ward, toward the volute side of the supercharger,
perpendicular to the front cover. When tightening
fitting, use a 1/2" wrench on the oil feed base for
support.
B. Slide the supplied 1/2" oil drain hose onto the
supercharger drain and secure with a #8 hose
clamp.
C. Using the supplied 3/8-16 x 1.75, 2.25 bolts and
3/8" AN washers, secure the supercharger to the
Vortech aluminum mounting bracket. (See Figs.
8-a, 8-b.) Do not overtighten bolts.
WARNING: When threading the 1/8" NPT x 45° flare
fitting into the supercharger, use engine
oil on the pipe threads for lubrication.
Teflon tape, paste or other sealant is not
recommended as it might loosen and
cause blockage of the oil feed orifice,
resulting in supercharger failure.
Fig. 8-b
Fig. 8-a