Vortech 2003-2004 Mustang Mach 1 - Manual (Page 39)

P/N: 4FR020-010
©2004 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured
23AUG04 86-93 4V Mus. Cobra(4FR v3.1)
P/N: 4FR020-010
©2004 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured
23AUG04 86-93 4V Mus. Cobra(4FR v3.1)
27
11. SUPERCHARGER DISCHARGE
A. Slide the 4-1/2" diameter sleeve and #72 hose
clamps onto the throttle body. Slide the 2-3/4"
sleeve and #44 hose clamps onto the supercharger
discharge.
B. Install the 1" x 3" hose, #16 hose clamps and
bypass valve onto the discharge tube with the
5/32" nipple on the valve pointing down.
C. Install the aluminum discharge tube onto the
throttle body. Slide the 3-1/2" sleeve and #56
clamps onto the round end of the tube. Next,
connect the supercharger to the aluminum tube
using the long discharge tube/bypass valve
assembly. Align the bypass valve, all hoses and,
tighten all clamps. If necessary, trim the 1" bypass
hose lengths for best fit. (See Fig. 11-a.)
D. Attach the supplied 5/32" vacuum line to the
bypass valve. Using the supplied 5/32" TEE,
connect the hose to the fuel pressure sensor
(located on the fuel rail) vacuum port.
E. Install supplied laser-etched plaque on top
of mounting bracket using the supplied #10
screws.
Fig. 11-a
AFTERCOOLER KITS ONLY: If an aftercooler kit is
being installed, please substitute the sup-
plied "Maxflow Power Cooler" instructions
in place of step 11. Resume at step 12 after
the completion of the Aftercooler installa-
tion.