Vortech GM 5.3L/6.2L Light Truck/SUV - 2007-2008 - Manual (Page 20)

P/N: 4GL020-018
©2008 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured
11NOV08 GM Trk/H2(4GL..018v2.0)
10
8. CHARGE COOLER INSTALLATION, cont’d.
Fig. 8-d
90 BRASS FITTING POINTING
TOWARD SURGE TANK
°
VIEW FROM REAR OF COOLER
STRAIGHT BRASS FITTING
H. Slide the 90° silicone elbow sleeve onto the
throttle body. Slide the 2-3/4" end of the
reducer sleeve onto the outlet side of the
cooler. Using the #48 hose clamps install dis-
charge tube "B" from the 3" end of the 90°
sleeve to the 3" end of the reducer sleeve on
the cooler. Use the #64 hose clamp to secure
the 90° sleeve to the throttle body. Tighten all
clamps. (See Fig. 8-c)
Fig. 8-c
Fig. 8-e (5.3L Shown) Fig. 8-f (6.2L Shown)