Vortech GM 5.3L/6.2L Light Truck/SUV - 2007-2008 - Manual (Page 22)

P/N: 4GL020-018
©2008 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured
11NOV08 GM Trk/H2(4GL..018v2.0)
12
Fig. 9-d
Fig. 9-e
E. Locate the capped-off manifold vacuum port
on the passenger’s side of the intake mani-
fold. Using a file, hacksaw or standard screw-
driver with hammer, remove the tip of the
capped-off section. Using the supplied 5/32"
vacuum line, connect the bypass valve pres-
sure port to the modified pressure port. (See
Fig. 9-d.)
F. Locate the hard plastic line running to the
drivers side rear of the engine. Remove the
hard line from the rubber hose.
G. Install the supplied 90° PCV valve into the
rubber hose on the engine.
H. Cut the hard plastic line to reach the PCV
valve and connect them with the supplied
length of 3/8" hose. (See Fig.
9-e.)
9. SUPERCHARGER BYPASS INSTALLATION, cont’d.
SUPPLIED 5/32" HOSE
SUPPLIED PCV VALVE