Vortech Alpha H3 Hummer - 2008 User Manual
Page 15
P/N: 4GN020-015
©2008 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured
20OCT08 v2.0 08HummrH3(4GNv1.0)
9
Fig. 5-k
5. MOUNTING BRACKET AND SUPERCHARGER INSTALLATION
, CONT’D.
O. (OIL-FED MODELS ONLY) Connect the 1/2"
oil drain hose from the S/C to the 1/2" tube
assembly previously installed in the oil pan
and secure. Using a cable tie secure the line
to the A/C line away from the A/C pulley
P.
(OIL-FED MODELS ONLY) Connect the open
end of the –4 stainless steel oil feed line to
the –4 x 90° fitting on the supercharger.
Q. Install the supplied drive belt as shown. (See
Fig. 5-k)
S/C
3”
FLANGED
IDLER
ALT.
IDLER
TENSIONER
WATER
PUMP
POWER
STEERING
CRANK
NOTE: Ensure that the hose does not have
any dips or kinks in the routing.
Supercharger failure may be the result
of a restricted drain path.