Vortech Alpha H3 Hummer - 2008 - Manual (Page 18)

P/N: 4GN020-015
©2008 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured
20OCT08 v2.0 08HummrH3(4GNv1.0)
12
6. RADIATOR HOSE MODIFICATION
A. Locate the upper radiator hose.
B. Cut the hose after the 45° leaving as much
straighht section as possible (approximately
1"). See Fig. 6-a.
C. Make a second cut approximately 2" before
the 90° bend. See Fig. 6-a.
D. Install the provided stainless steel radiator
tube and secure using the supplied #20 hose
clamps. See Fig. 6-b.
NOTE: Adjust the hose ends as necessary to pro-
vide the best possible drive belt and idler
pulley clearance.
Fig. 6-a
Fig. 6-b