Bypass valve installation – Vortech 1994-2001 Acura Integra GSR User Manual

Page 21

Advertising
background image

P/N: 4HC020-030

©2004 Vortech Engineering, LLC

All Rights Reserved, Intl. Copr. Secured

28JAN04v2.1(Acura Integra LS (4HC..030v2.1))

13

15.

BYPASS VALVE INSTALLATION

A. Use the supplied 1" hose to connect the

bypass valve inlet to the 1" barb on the super-
charger discharge tube/duct. (See

Fig. 15-a.)

B. Install the supplied filter onto the bypass valve

discharge.

C. Tighten hose clamps on each connection.
D. Using supplied 5/32" vacuum line and TEE,

connect barb on bypass valve to manifold
vacuum. Use the manifold vacuum line con-
nected to the fuel regulator.

Fig. 15-b

Fig. 15-a

5/32” HOSE

SUPERCHARGER

DISCHARGE TUBE

BYPASS VALVE

BYPASS VALVE
AIR FILTER

Advertising
See also other documents in the category Vortech For the car: