Vortech 8-Rib Drive Upgrade for 2011-2012 Mustang GT - Manual (Page 14)

6
P/N: 007130 v1.0, 2012-02-10
© 2012 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured.
14. Remove OEM idler on driver side front
cover. Install new idler pulley (4FQ116-
031) with .140 thick spacer (2A017-882-
01) on pilot. (See Fig. 11)
15. Replace tensioner pulley; use 2X spacers
(7J625-030) on pilot, then place pulley
(4FQ116-051) on tensioner. (See Fig. 12)
16. Replace OEM alternator pulley with 8-rib
pulley (4FQ016-041), washer (7J625-
001) and nut (7F014-001). Tighten nut
with impact gun. (See Fig. 13)
Fig 11
Fig 12
Fig 13
NOTE: Clearance for snap ring to be .020 MIN
(See Fig. 12)
CHECK CLEARANCE