Vortech 8-Rib Drive Upgrade for 2011-2012 Mustang GT - Manual (Page 21)

13
P/N: 007130 v1.0, 2012-02-10
© 2012 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured.
2. FINAL CHECK
A. Check all fittings, hose and clamps for tight-
ness and leaks. Make sure all wires and lines
are properly secure with clamps or tie-wraps.
B. Make sure all wires and hoses are routed
away from hot, moving or sharp objects.
C. Test drive the vehicle.
D. Always listen carefully for engine detonation.
Discontinue heavy throttle usage if detonation
is heard.
WARNING: Do not attempt to operate the vehicle until
ALL components are installed and ALL
operations are completed including the
final check.
• Custom ECM programming and fuel / ignition
system upgrades will be required when changing
the supercharger drive pulley to any size other
than what was originally supplied in the complete
supercharger kit.
• A vortech Maxflow Race or Mondo compressor
bypass valve is requires for applicaitons produc-
ing more than 11-12 psig.