Vortech Maxflo Fuel Pump Booster (FPB) for 2011-2012 Mustang - Manual (Page 15)

DP/N: 007127v1.1, 2012-02-21
© 2012 Vortech Engineering, Inc.
All Rights Reserved, Intl. Copr. Secured. 9
3. FPVB WIRING, CONT’D
L. Using one of the supplied ring terminals, solder
or crimp onto the black ground wire of the FPB
unit and attach to one of the existing factory
ground points. (See Fig 3-h)
M. Connect the orange 12 GA wire to the OEM vio-
let with green/blue tracer (previously cut) wire
going to the fuel pump driver module. (See Fig
3-i)
N. Connect the small red 14GA wire from the FPB
to the other portion of the violet with green/blue
tracer. (See Fig 3-k and 3-j)
O. Attach the 10 GA wire previously routed from the
front of the vehicle to the 40 Amp fused wire on
the FPB.
Fig. 3-h
Fig. 3-i
Fig. 3-j Fig. 3-k
NOTE: Do NOT re-attach to battery at this time.
ORANGE 10GA
WIRE FROM
FPB
RED 14 GA
TRIGGER WIRE
FROM FPB
RED 14 GA
TRIGGER WIRE
FROM FPB