Foreword, Stop – Vortech Maxflo Fuel Pump Booster (FPB) for 2011-2012 Mustang User Manual
Page 2
DP/N: 007127v1.1, 2012-02-21
© 2012 Vortech Engineering, Inc.
All Rights Reserved, Intl. Copr. Secured.
iiii
FOREWORD
Take note of the following before proceeding:
1.
Proper installation of this accessory requires general automotive
mechanic knowledge and experience. Please browse through each step
of this instruction manual prior to beginning the installation to determine if
you should refer the job to a professional installer/technician. Please con-
tact your dealer or Vortech Engineering for possible installers in your
area.
2.
This product was designed for use on stock (un-modified, OEM)
vehicles. The PCM (computer), engine, transmission, drive axle
ratios and tire O.D. must be stock. If the vehicle or engine has been modi-
fied in any way, check with Vortech prior to installation and use of this product.
3.
Use only premium grade fuel with a minimum of 91 octane (R+M/2).
4.
Always listen for any sign of detonatlion (knocking/pinging) and discontinue hard
use (no boost) until the problem is resolved.
5.
Vortech is not responsible for any clutch, transmission, drive-line or engine dam-
age.
Exclusions from Vortech warranty coverage considerations
include, but not limited to:
1.
Neglect, abuse, lack of maintenance, abnormal operation or improper installation.
2.
Continued operation with an impaired vehicle or sub-system.
3.
The combined use of Vortech components with other modifications such as, but
not limited to, exhaust headers, aftermarket camshafts, nitrous oxide, third party
PCM programming or other such changes.
©2012 VORTECH ENGINEERING, INC
All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, or translated into
another language in any form, by any means without written permission of Vortech Engineering, Inc.
All information, illustrations and specifications contained herein are based on the latest
product information available at the time of this publication. Changes to the manual may be
made at any time without notice. Contact Vortech Engineering for any additional informa-
tion regarding this kit and any of these modifications at (805) 247-0226 8:00am-4:30pm
PST.
STOP