Direct-vent fireplace, Fireplace installation, Continued – Desa DVFE34 User Manual

Page 22

Advertising
background image

22

107205

DIRECT-VENT FIREPLACE

For more information, visit www.desatech.com

INSTALLING OPTIONAL
BRICK LINER D8037A

WARNING: If fireplace has

been running, turn off and un-
plug fireplace. Let cool before
installing brick liner.

This brick liner kit is optional. You may
purchase brick liner from your local retailer
or see Accessories, page 34.

CAUTION: Always handle

brick panels with two hands. Do
not force brick panels into place.
Excessive force will break brick
panels.

1.

Remove glass door. See Removing/Re-
placing Glass Door
, pages 21.

2.

If installing brick liner in new fireplace,
go to step 3. If installing brick liner in
an existing fireplace, carefully remove
logs, lava rock, and ember material.

3.

Install left side brick panel first by slid-
ing it between the grate and the side of
the firebox (see Figure 43).

4.

Slide the left retainer bracket against
the left side brick panel. Loosely se-
cure the bracket screw. This secures the
left side brick panel.

5.

Install the right brick panel using the
same method described in step 3.

6.

Slide the right retainer bracket against
the right side brick panel. Loosely se-
cure the bracket screw. This secures the
right side brick panel.

7.

Install rear brick panel. Rest bottom
edge of panel on back edge of grate (see
Figure 44).

WARNING: The glass door

must be securely in place before
running this fireplace. Do not run
this fireplace if glass is missing or
broken.

FIREPLACE
INSTALLATION

Continued

Attaching Magnetic Decorative
Brass Strips

This fireplace comes with a set of two
magnetic decorative brass strips. Before
attaching strips to fireplace, remove plastic
film from brass pieces. After installing the
door, attach these strips to the top and bot-
tom of the glass door frame.

8.

Loosely secure retainer brackets to grate.
Brackets are adjustable left to right to
allow proper placement of panel. These
will hold rear panel in place.

9.

Tighten all bracket screws.

10. Follow instructions on page 23 to install

logs, lava rock, and ember material.

11. Replace glass door (see page 21).

Figure 43 - Installing Left Side Brick Panel

Figure 44 - Installing Rear Brick Panel and Retainer Brackets

Left Side
Brick Panel

Retainer
Brackets

Rear Brick Panel

Retaining Brackets

Advertising