Xblue Networks X-2020 - Manual (Page 64)

Telephone Programming
64 XBLUE Networks
5
1. Call Log
Menu Programming
Press the softkey under the word “Menu” to get into menu programming. There are two levels of programming,
the standard menu, which does not require a password and Admin, option “16. Admin” which requires a password.
Press Menu to begin:
1. Call Log
There are three types of call log, Dialed Calls, Missed Call, and Received Calls.
Deleting a Call Log
While reviewing any one of these call logs - You may delete a single entry by highlighting the entry and pressing
the “DEL” softkey or to delete all entries press the “DelAll” softkey.
1. Dialed Calls
Similar to Redial, each telephone stores up to 30 dialed telephone numbers. These numbers can be used to redial
a previously dialed telephone number. Scroll through the numbers and press the center navigation key to dial the
desired telephone number.
2. Missed Calls
Each telephone will store up to 30 missed calls to the extension. These are calls that rang at your extension but
were not forwarded or answered. Scroll through the numbers, and press the center navigation key to dial the
desired telephone number.
3. Received Calls
Each telephone can store up to 30 received calls to the extension. These are calls that were answered at your
extension. Scroll through the numbers, and press the center navigation key to dial the desired telephone number.
Clue:
For proper operation, this feature requires that the X-25
Gateway has the home and local area code programming
correct.