Xblue Networks X-2020 - Manual (Page 67)

XBLUE Networks 67
Telephone Programming
8. D
o Not Disturb
(DND
)
5
8. Do Not Disturb (DND)
Select “Yes” to place your telephone into Do Not Disturb. If DND Forward is not enabled calls will not be able to be
transferred to your extension.
9. Call Waiting
Select “On” to enable Call Waiting, and “Off” to disable Call Waiting. If Call Waiting is disabled and your extension is
not Busy Call Forwarded your extension will not accept transferred calls.
10. Auto Answer
Select “On” to enable auto answer and “Off” to disable Auto Answer. If Auto Answer is enabled all calls, intercom and
telephone line will be automatically answered.
11. Tone Type
Unless the telephone is installed in a different country, the Tone Type should be set to USA.
12. Ping
Ping is a troubleshooting tool that is used to locate other devices on a network. Enter the IP Address to ping and then
press the center navigation (Check) key. “Ping Success” is seen when the location is successfully pinged, “Ping Failure”
will be seen if the location is unsuccessfully pinged.
13. Phonebook
The phonebook holds up to 200 telephone numbers that can be sorted by Item (in the order that the numbers are
entered), Name (Alphabetical by the first name entered), Group (None, Family, Friends, Colleague, or VIP.
14. Hotline
Hotline, sometimes called a “Ringdown”, is used to force the telephone to do the same thing each time the user goes
off hook by lifting the handset or pressing the speaker button. For example, each time a telephone located in a lobby
goes off hook it dials the operator. It can also be programming to automatically access a telephone line or call an
external telephone number. Just enter the Hotline Number, from 1 to 15 digits. In addition, the phone can be
programmed to wait from zero - no waiting to eight seconds prior to taking the programmed action.
Caution:
Enabling this feature will result in all calls into the system to
be automatically be answered by any telephone with Auto
Answer enabled.