Specifications, English – Denon AVR-2807 User Manual
Page 74
70
ENGLISH
ENGLISH
Specifications
Specifications
2
Audio section
• Power amplifier
Rated output:
Front (A, B):
110 W + 110 W (8
Ω
/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
140 W + 140 W (6
Ω
/ohms, 1 kHz with 0.7 % T.H.D.)
Center:
110 W (8
Ω
/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
140 W (6
Ω
/ohms, 1 kHz with 0.7 % T.H.D.)
Surround:
110 W + 110 W (8
Ω
/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
140 W + 140 W (6
Ω
/ohms, 1 kHz with 0.7 % T.H.D.)
Surround Back:
110 W + 110 W (8
Ω
/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
140 W + 140 W (6
Ω
/ohms, 1 kHz with 0.7 % T.H.D.)
Dynamic power:
120 W x 2 ch (8
Ω
/ohms)
170 W x 2 ch (4
Ω
/ohms)
Output terminals:
Front:
A or B
6 ~ 16
Ω
/ohms
A + B
8 ~ 16
Ω
/ohms
Center, Surround, Surr. Back 6 ~ 16
Ω
/ohms
• Analog
Input sensitivity / input impedance:
200 mV / 47 k
Ω
/kohms
Frequency response:
10 Hz ~ 100 kHz: +0, –3 dB (DIRECT mode)
S/N:
102 dB (DIRECT mode)
Distortion:
0.005% (20 Hz ~ 20 kHz) (DIRECT mode)
Rated output:
1.2 V
• Digital
D/A output:
Rated output — 2 V (at 0 dB playback)
Total harmonic distortion — 0.008 % (1 kHz, at 0 dB)
S/N ratio — 102 dB
Dynamic range — 96 dB
Digital input:
Format — Digital audio interface
• Phono equalizer (PHONO input — REC OUT)
Input sensitivity:
2.5 mV
RIAA deviation:
±1 dB (20 Hz to 20 kHz)
S/N:
74 dB (A weighting, with 5 mV input)
Rated output / Maximum output:
150 mV / 8 V
Distortion factor:
0.03% (1 kHz, 3 V)
2
Video section
• Standard video terminals
Input / output level and impedance:
1 Vp-p, 75
Ω
/ohms
Frequency response:
5 Hz ~ 10 MHz — +0, –3 dB
• S-Video terminals
Input / output level and impedance:
Y (brightness) signal — 1 Vp-p, 75
Ω
/ohms
C (color) signal — 0.3 (PAL) / 0.286 (NTSC) Vp-p, 75
Ω
/ohms
Frequency response:
5 Hz ~ 10 MHz — +0, –3 dB
• Color component video terminal
Input / output level and impedance:
Y (brightness) signal — 1 Vp-p, 75
Ω
/ohms
P
B
/C
B
signal — 0.7 Vp-p, 75
Ω
/ohms
P
R
/C
R
signal — 0.7 Vp-p, 75
Ω
/ohms
Frequency response:
5 Hz ~ 100 MHz — +0, –3 dB
2
Tuner section
[FM]
[AM]
(note: µV at 75
Ω
/ohms, 0 dBf = 1 x 10
–15
W)
Receiving Range:
87.5 MHz ~ 108.0 MHz
522 kHz ~ 1611 kHz
Usable Sensitivity:
1.0 µV (11.2 dBf)
18 µV
50 dB Quieting Sensitivity:
MONO
1.6 µV (15.3 dBf)
STEREO
23 µV (38.5 dBf)
S/N (IHF-A):
MONO
77 dB
STEREO
72 dB
Total Harmonic Distortion (at 1 kHz):
MONO
0.15%
STEREO
0.3%
2
General
Power supply:
AC 230 V, 50 Hz
Power consumption:
500 W
1 W Max (Standby)
Maximum external dimensions:
434 (W) x 171 (H) x 429 (D) mm
Mass:
14.0 kg
2
Remote control unit (RC-1030)
Batteries:
R6P/AA Type (3 batteries)
External dimensions:
58 (W) x 230 (H) x 37 (D) mm
Mass:
230 g (included batteries)
* For purposes of improvement, specifications and design are subject to change without notice.