Headlamp aiming, Headlamp aiming -32 – Pontiac 2010 Vibe User Manual

Page 216

Advertising
background image

2. Raise the wiper arm until it

comes off.

You will hear a clicking sound
when the arm comes off.

3. Push the rear wiper assembly

straight into the rear wiper arm.

4. Reengage the two pins to the

rear wiper arm by pushing
them down.

Headlamp Aiming

Headlamp aim has been preset at
the factory and should need no
further adjustment.

However, if your vehicle is damaged
in a crash, the headlamp aim may
be affected. Aim adjustment to the
low-beam headlamps may be
necessary if oncoming drivers flash
their high-beam headlamps at you
(for vertical aim).

If the headlamps need to be
re-aimed, it is recommended that
you take the vehicle to your
dealer/retailer for service.

9-32

Vehicle Care

Advertising