Ryobi RY80518 - Manual (Page 11)

Page 7 — English
PRODUCT SPECIFICATIONS
Fuel Tank Capacity ....................................................................................................................................................0.25 gal.
Maximum Pounds Per Square Inch Pressure* ......................................................................................................... 2,200 psi
Maximum Gallons Per Minute* ...................................................................................................................................2.0 gpm
Maximum Inlet Water Temperature ................................................................................................................................104˚F
Lubricant Fill Volume ....................................................................................................................................................15 oz.
Replacement Spark Plug ............................................................................................................. Torch F6RTC or equivalent
*Max. rating determined by PWMA Standard 101
KNOW YOUR PRESSURE WASHER
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator’s manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
AUTOMATIC DETERGENT INJECTION
SYSTEM
Place the detergent injection hose with filter into your desired
pressure washer detergent to apply detergent quickly and
easily to your cleaning project. Use of the soap nozzle will
activate the detergent injector at a 20:1 dilution ratio.
FUEL TANK
This fuel tank has a maximum capacity of 0.25 gal. Use
unleaded automotive gasoline in the engine.
HOSE STORAGE
Once the high pressure hose is rolled, hang it on the machine
using the hook-and-loop strap to secure in place.
OFF SWITCH
To turn the engine off, press and hold the OFF switch.
RECOIL STARTER
The recoil starter is pulled to start the machine.
SOAP NOZZLE
The blue soap nozzle is used to apply detergent at low
pressure only.
SPARK ARRESTOR
This engine is not factory equipped with a spark arrestor. In
some areas it is illegal to operate an engine without a spark
arrestor. A spark arrestor is available by calling customer
service for assistance.
THERMAL RELIEF VALVE
This pump feature will prevent water temperatures from
reaching harmful levels by releasing a small amount of
water. Once the water has drained, the thermal relief valve
will reset itself.
TRIGGER HANDLE
The trigger handle has a gripping surface that provides
added control of the spray wand and helps reduce fatigue.
TRIGGER WITH LOCK OUT
Pulling the trigger releases a stream of water for high
pressure cleaning. The lock out provides protection against
unauthorized use.
FEATURES