Dell PowerConnect M6220 - Manual (Page 170)

168 Configuring System Information
Defining Enable Passwords
1. Open the Enable Password page .
2. Specify the Enable password.
3. Confirm the Enable password.
4. Click Apply Changes.
The Enable password is set.
Assigning Enable Passwords Using CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide :
• AAA Commands.
TACACS+ Settings
The device provide Terminal Access Controller Access Control System (TACACS+) client support.
TACACS+ provides centralized security for validation of users accessing the device.
TACACS+ provides a centralized user management system, while still retaining consistency with
RADIUS and other authentication processes. TACACS+ provides the following services:
• Authentication — Provides authentication during login and through user names and user-defined
passwords.
• Authorization — Performed at login. Once the authentication session is completed, an authorization
session starts using the authenticated user name. The TACACS+ server checks the user privileges.
The TACACS+ protocol ensures network security through encrypted protocol exchanges between the
device and TACACS+ server.
The TACACS+ Settings page contains both user-defined and the default TACACS+ settings for the
inband management port.
To display the TACACS+ Settings page, click System > Management Security > TACACS+ in the
tree view.