Dell PowerConnect M6220 - Manual (Page 418)

416 Configuring Switching Information
Configuring Port Aggregator Groups
You can assign each port to an aggregator group from the Port Configuration page, which is accessible
from the Port Configuration Summary page. By default, all ports are in aggregator group 1.
1. Open the Port Configuration Summary page.
2. Click any Modify link to access the Port Configuration page.
The Port Configuration page displays.
Figure 7-130. Port Aggregator Group Port Configuration
3. If the system supports stacking, select the stack member to configure.
4. Enter the Port Aggregator Group ID in the Group ID field for the ports to add to a group.
Each port can only belong to one Port Aggregator group.
5. Click Apply Changes.
6. To return to the Port Configuration Summary page, click Show All.