Dell PowerConnect M6220 - Manual (Page 659)

Configuring IP Multicast 657
• Expiry Time (secs) — The time in seconds before this entry ages out and is removed from the table.
• RPF Neighbor — The IP address of the Reverse Path Forwarding neighbor.
•
Protocol — The multicast routing protocol which created this entry. The possibilities are:
–
PIM-DM
– PIM-SM
– DVMRP
• Flags — The value displayed in this field is valid if the multicast routing protocol running is PIM-SM.
The possible values are RPT or SPT. For other protocols an "------" is displayed.
Displaying MRoute Summary using the CLI Command
For information about the CLI command that performs this function, see the following chapter in the
CLI Reference Guide:
• Multicast Commands