6 commissioning, 1 wiring, 3 general wiring guidelines – Pilz PNOZ m EF 8DI4DO User Manual
Page 12: 4 connection, Section 6, Commissioning, Wiring, General wiring guidelines, Connection, 6commissioning
Commissioning
Operating Manual PNOZ m EF 8DI4DO
1002661EN02
12
6
Commissioning
6.1
Wiring
The wiring is defined in the circuit diagram of the PNOZmulti Configurator.
Please note:
}
Information given in the "Technical details" must be followed.
}
Use copper wire that can withstand 75°C.
6.2
Download modified project to the PNOZmulti safety system
As soon as an additional expansion module has been connected to the system, the project
must be amended using the PNOZmulti Configurator. Proceed as described in the operat
ing instructions for the base unit.
NOTICE
For the commissioning and after every program change, you must check
whether the safety devices are functioning correctly.
6.3
General wiring guidelines
The wiring is defined in the circuit diagram of the PNOZmulti Configurator.
Please note:
}
Information given in the "Technical details" must be followed.
}
Use copper wire that can withstand 75°C.
6.4
Connection
Supply voltage
DC
24 V
+ 24 V DC
0 V
0 V
Supply voltage