Pilz PSSu E S 4DI-D - Manual (Page 3)

Content
Operating Manual PSSu E S 4DI-D
1001322-EN-04
3
Section 1 Introduction 5
1.1 Validity of documentation 5
1.1.1 Retaining the documentation 5
1.1.2 Terminology: System environment A and B 5
1.2 Definition of symbols 6
Section 2 Overview 7
2.1 Module structure 7
2.1.1 Module features 7
2.2 Front view 8
Section 3 Safety 10
3.1 Intended use 10
3.2 Safety regulations 11
3.2.1 Use of qualified personnel 11
3.2.2 Warranty and liability 11
3.2.3 Disposal 11
Section 4 Function description 12
4.1 Module features 12
4.1.1 Function description 12
4.1.2 Integrated protection mechanisms 13
4.1.3 Reaction times 13
4.2 Configuration 14
4.2.1 PSSu assignment in system environment A 14
4.2.1.1 Addresses in the process image 14
4.2.1.2 Status byte 14
4.2.2 PSSu assignment in system environment B 15
Section 5 Installation 16
5.1 General installation guidelines 16
5.1.1 Dimensions 16
5.2 Installing the base module 17
5.3 Inserting and removing an electronic module 18
5.3.1 Inserting an electronic module 19
5.3.2 Removing an electronic module 20
5.3.3 Changing an electronic module during operation 20
Section 6 Wiring 21
6.1 General wiring guidelines 21
6.1.1 Mechanical connection of the base modules 21
6.2 Terminal configuration 23
6.3 Connecting the module 25