Lenco CS-420 - Manual (Page 11)

11
OPERATION
unchanged. When region is off, it allows
the reception moves to the regional
station.
- Listening to Traffic Announcement
In TA item of the SEL menu. Rotating the
audio knob (3) to switch on or off the TA
function. When TA mode is on and a
traffic announcement is transmitted:
When the unit was in MP3 or AUX IN
mode, it will switch temporarily to radio
mode.
Temporary switch over to an EON linked
station when EON detects a traffic
announcement on that other program. If
the volume level was under the threshold
point it will be raised to the threshold point.
But the user changed the volume level,
which was more than the threshold point
(min. TA volume level), it will be set to the
last level. In TA item of the SEL menu. By
rotating the audio knob (3), TA mode is on,
TA of individual segment is turned on.
When a TP station is received, TP of
individual segment is turned on.
TA interruption function
The current traffic announcement is
cancelled by turn the TA function to STOP
(in TA item of SEL menu, when the TA
station is not received it only has on/off.
But when received a TA station the TA
item will have on/stop/off for your
selection). But the TA mode will not be off.
which EON TA information was received
from current station and the radio
switched to that EON linked station, but no
Information
could not be received
because the EON linked station is located
too far from that area. So the radio is
switched back to current station again. In
above operation, a customer listens to a
wrong program or mute
sound for a while.
RDS data used are the PI, PS, AF, TP, TA,
EON and PTY data.
PI: Program Identification code
Code for identifying programs
PS: Program Service Name
Broadcast station name data
expressed in alphanumerically
characters
AF: Alternative Frequencies Frequency list
of broadcasting stations transmitting
the same program
TP: Traffic Program Identification
Identification data for traffic
information-broadcasting station
TA: Traffic Announcement Identification
Identification data showing traffic
information is being transmitted or not
EON: Enhanced Other Networks
Information
Broadcasting information on PI, AF, TP, TA,
etc, relating to networks other than the
network used for current reception.
In SEL menu when turn the TA to off will
turn off the TA funcion.
Using PTY to Select Program
Press and hold PTY button (16) for 2
seconds. It shows the PTY kinds on the
display. Then press preset button(1~6).
You can select the program type as below.
After several seconds it will searching
automatically.
1# button: NEWS/AFFAIR/INFO
2# button: EDUCATIO/DRAMA/SPORT
3# button: VARIED/CULTURE/SCIENCE
4# button: FINANCE/CHILD
REN/WEATHER
5# button: PHONE IN/SOCIAL/RELIGION
6# button:
TRAVEL/LEISURE/DOCUMENT
Press and hold PTY button (16) 2 times.
Then press preset button(1~6). You can
select the program type as below:
1# button: ROCK M /POP M
2# button: LIGHT M/EASY M
3# button: OTHER M/CLASSICS
4# button: COUNTRY/JAZZ
5# button: NATION ML/OLDIES
6# button: FOLK M