Lenco CS-440 BT - Manual (Page 11)

10
POP M< -->ROCK M<-->EASY M<-->LIGHT M<--> CLASSICS<-->OTHER
M<-->JAZZ<-->COUNTRY<-->NATION M<-->OLDIES<-->FOLK M<-->
When PTY group is on, pressing the 6 number buttons also can select one of PTY programs as above.
After selecting one of the PTY programs, it will display SEEK PTY and automatically search for the
station of the PTY program. If the station of the PTY program does not exist, it will display PTY NONE
and then return back to the normal station.
8. AF [ALTERNATIVE FREQUENCIES] BUTTON
When pressing the AF button briefly, the AF switching mode is selected and the state of the AF switching
mode is displayed by AF segment in display.
Segment off: AF switching mode off.
Segment on: AF switching mode on, and has RDS information.
Segment flashing: AF switching mode on, but RDS information is not
received yet.
When the AF switching mode is selected, the radio checks the signal strength of the AF all the time.
The interval of checking time of each AFs depends on the signal strength of the current station, from a
few minute for the strong station to a few seconds for the weak station. Every time that a new AF is
stronger than the current station, it switches over to that frequency for very short time, and the NEW
FREQUENCY is displayed for 1-2 second. Because the mute time of the AF switching or the checking
time is very short, it is almost inaudible in case of normal program. (When AF flash on LCD, it will
search for the stronger RDS station. If AF and TP flash on LCD, it can only search for the traffic
announcement station).
In FM mode, when AF is on, SEEK, (SCAN), AUTO-MEMORY function can only receive and save the
RDS program.
9. TA [TRAFFIC ANNOUNCEMENT] BUTTON
Press the TA button shortly to turn on TA search mode.
When traffic announcement is transmitted:
1).If the unit is in media Play mode, it will switch to radio mode temporarily.
2).Temporarily switch over to a station which is broadcasting traffic announcement , and TA, TP will be
displayed on LCD
* TA interruption function:
The current traffic announcement is cancelled by pressing TA button briefly.
* When TA is on, SEEK, (SCAN), AUTO MEMORY function can be received or saved only when traffic
program identification code has been received.