Lenco CS-440 BT - Manual (Page 19)

18
5. BLUE TOOTH HANDFREE SYSTEM
1. Enter Bluetooth mode
When you use MODE button or Mode Menu to enter
Bluetooth mode, it will display Bluetooth interface as right.
Press and hold the BAND button to turn on shift then to do select.
2. Pairing and connection
1) Turn on the Bluetooth mode of the mobile phone;
2) Select the item of Finding the Bluetooth Device and enter it.
After finishing the finding, it will show the name of the
Bluetooth Device if finding a Bluetooth Device.
Select it and enter it, then it will show a interface that ask
you to input a password, input the password 0000 and then enter it.
Then it will tell you pair OK.
3) For some mobile phones, they can automatically connect with the
BT device of the car audio system after pairing is ok; for some
mobile phones, they need to select the paired BT device and press the CONNECTION button.
When connection is ok, the LCD of the car audio system will show LINK OK.
* when pairing is failed, press and hold the PAIR button on the remote control to enter pairing mode,
then the LCD will display PAIR START, then pair and connect with mobile phone again.
3. Use the mobile phone to do connection or disconnection
In the connection status, find the paired and connected Bluetooth Device, then press the disconnection
button to do disconnection;
In the disconnection status, find the paired and disconnected Bluetooth Device, then press the
connection button to do connection.
4. In the connection status: the audio of mobile phone transfers to the car audio system whenever
a dialling takes place or receiving a call.
5. Dialling when in connection status
5.1 Dial with the mobile phone directly.
5.2 Dial with remote control with the following procedures:
(1) Input telephone number with number buttons 0-9
* Press CLEAR button briefly to cancel the wrongly input number if necessary
(2) Press TEL briefly to execute the dialling.
5.3 To redial the last phone number dialled
Press REDIAL button briefly or tap the icon
to validate the last phone number.
6. Accept/Reject/End Call
6.1 When ringing, press TEL button briefly to accept the call;
6.2 When ringing, press HANGUP button briefly to reject the call;
6.3 When talking, press HANGUP button briefly to end the call.
Bluetooth interface
NOTE interface