Lenco LED-2213 - Manual (Page 17)

NAME: Select the channel, press GREEN
button on the remote control to change the
name of the channel.
(Use button to name, and press
OK button to confirm)
LOCK: Select the channel, press RED button
to lock the channel. You have to enter the
code to view the channel you have locked.
Note: you could set the code in System Lock
menu in FUNCTION menu, the original code
is 0000.
INSERT: Select a channel you want to insert,
press YELLOW button, then select the position,
press GREEN button to insert, or you could
press RED button to cancel the option.
Program Edit: Press button to enter the submenu as the following picture.
Program Edit menu for ATV
FAV
FAV：Press blue button to add the channel
FAV list.
15