Lenco LED-2213 - Manual (Page 37)

You can set up the event timer by pressing RED
key in the
EPG schedule screen.
To set up an timer event:
1.Press UP/DOWN to move the cursor to the
event for which you want to add a timer.
2.Press RED key to add a timer.
shows you current event timer information
based on the event you have chosen. You can
also use this screen to modify each value. To
save the settings, press OK. To quit event timer setup, press EXIT.
EPG pre-recorded: the setting is the same as pre-recorded setting of timer.
2.4 Selection Audio Language
Press the AUDIO button on the remote control to select the audio language as show in.
Select the
LEFT, RIGHT, MIX or STEREO . Press OK to make one selection.
2.5 TELETEXT function
In no-menu state, press TEXT. Press UP / DOWN to move up or down from the displayed
page number.
Press Numeric keys to input page directly. If the current program has no Teletext, you’ll see
the message
“Teletext no data – Press any key to exit”.
2.6 Subtitles
In no-menu state, press SUB. Press LEFT/RIGHT to select between teletext and DVBS
subtitles. Use UP/DOWN to select subtitles language. Confirm your selection with OK button.
35