Lenco LED-2213 - Manual (Page 27)

1.1.3.3 Polarity
You can select the
polarity.
1.1.3.4 Symbeol Rate
You can select Symbol Rate.
1.1.3.5 NIT Searching
You can select the NIT
Searching.
1.1.3.6 Free
You can select the
free mode.
.
1.2 System setting
In this menu, you can configure the systems such as language Setting, OSD style, Parental
Control, TV Settings, Time Setting and System Update.
1.2.1 Preference
You can set the OSD language, the Audio
language, TV mode, Video output, Screen
mode, set factory default, Modulator settings
and Time setting.
1.2.1.1 OSD Language
Press LEFT/RIGHT to select the
OSD
language.
1.2.1.2 Audio Lang
Press LEFT/RIGHT to select the
Audio language.
1.2.1.3 TV Mode
Press LEFT/RIGHT to select
PAL or NTSC .
If you don’t know which standard your TV has, please select AUTO .
1.2.1.4 Set Default
Press LEFT/RIGHT to select the
ALL or Scramble .
Press the OK key, enter the code, the receiver will return to its factory default state, and the
data will be deleted.
NOTE: Your PIN code will change back to the factory setting “0000”.
25