Lenco MDV-15 User Manual
Page 11
10
BASIC OPERATION
Pause
During playing a disc, press
the
PAUSE
button
to
pause,
press
this
button
again
or
PLAY/ENTER button to continue playing.
Menu
While playing a VCD, press the MENU button , PBC current state view mode will be Opened
/closed.
1. During
playing
DVD, press
the
MENU
button
to
go
into
the
root
menu
status.
2. Some
pirate
discs
do
not
support
this
function.
Angle view selection
In playing mode, press the ANGLE button to switch angle view (if a disc supports this functi).
Digital buttons
While playing audio files, press the DIGITAL button to input the number of the required track.
If the number of the track consists of two digits, press the 10+ button, then input the second digit
of the number. For example, input 16, press the 10+ button and then press the 6 button.
Sound field
Press the DSP button to select different fields: Dance, Classic, Jazz, Rock, Pop, Off.
Tone
While playing a disc, press TONE button on the remote control to switch to Bass or
Treble adjusting mode; press VOL+/- button to adjust the effect of Bass or Treble.
Direction buttons
Press the direction buttons to move the cursor.
Play/Enter
Press the PLAY/ENTER button to enable the selected items.
DVD, FM, Tape and Audio-in
Press the DVD button on the remote control or on the front panel of this unit to enter DVD
mode.
Press the FM button on the remote control or on the front panel of this unit to enter FM mode.
Press the TAPE button on the remote control or on the front panel of this unit to enter TAPE
mode.
Press the AUDIO-IN button on the remote control or AUDIO button on the front panel of
this unit to enter AUDIO mode.