Lenco MDV-15 - Manual (Page 18)

17
MENU SETUP
Audio Setup Page
1. Analog Audio Setup
1) Surround
LT/RT: audio output from Left and Right channel
Stereo: stereo audio output
2) Dual Mono
This option is used to set the mode of audio output, including L-Mono, R-Mono,
Mix-Mono,and Stereo.
3) Dolby-Dynamic
This option is chosen when Line output is selected for the compression mode. Linear
compression ratio is adjusted to acquire different compression effects. .
2. Digital Audio
1) Digital Output
When playing DOLBY or MPEG discs, the coaxial and optical terminal outputs in
SPDIF/RAW format. Meanwhile the connected amplifier must be able to decode the
DOLBY DIGITAL or MPEG.
SPDIF/PCM may be selected when the player is connected with a 2CH digital stereo
amplifier.
2) LPCM Output
LPCM (Linear Pulse Code Modulation) is a non-compressed audio digital technology.
There are three output modes: 48KHz, 96KHz.
3. Equalizer
1) Bass Boost
It use to adjust the sound effect of Bass boost to ON or OFF.
2) Super Bass
ON: set the super bass on, and adjust the super bass effect.
OFF: set the super bass off.