Lenco MDV-15 - Manual (Page 22)

21
CASSETTE OPERATION
1. Preparation
1) Turn on this unit; and press TAPE button on the front panel or on the remote
control to switch to tape playing status.
2) Press the open mark on the cassette door to open the cassette; place a tape in (keep
the tape in the right place);close the cassette door. Press the PLAY/ENETR button
to play.
2. Fast forward and fast backward
Press Fast rewind or Fast forward button on the front panel to play backward or
forward.
Note: In fast forward or fast backward status, no audio output.
3. Record
In DVD, FM or Audio signal input status, you can place the recording tape in the
cassette.
Press the REC button, the unit will start recording. Press the STOP/OPEN button to
stop recording.
4. Exit Tape mode
Press the FM, AUDIO-IN,or DVD button on the remote control or front panel to exit
Tape mode, and switch to the according
modes.
5. Maintenance
1) Do not play unclean or scratched tape.
2) Please keep this unit in clean and cool conditions.
3) The little tape scroll volume may result from the dirty unit core or tape, please take
the tape out carefully and clean the core.