Lenco SCD-1000 - Manual (Page 2)

GB-2 GB-3
STANDBY
OK
SLEEP USB CARD
CD FM TAPE AUX IN
REP RAN ST/MO DISPLAY
TUNE TREBLE BASS VOL
MEM ID3 PROG
HR
TIMER CLOCK
MIN
MUTE
FOLDER
CH
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
REMOTE CONTROL
1. SLEEP BUTTON
2. CARD BUTTON
3. CD BUTTON
4. FM BUTTON
5. REP BUTTON
6. RAN BUTTON
7. PREVIOUS/FAST BACKWARD BUTTON
8. NEXT/FAST FORWARD BUTTON
9. TUNE + BUTTON
10. TREBLE + BUTTON
11. TUNE - BUTTON
12. TREBLE - BUTTON
13. MEM BUTTON
14. ID3 BUTTON
15. CH + BUTTON
16. HR BUTTON
17. CH- BUTTON
18. TIMER BUTTON
19. STANDBY BUTTON
20. USB BUTTON
21. AUX IN BUTTON
22. TAPE BUTTON
23. DISPLAY BUTTON
24. ST/MO BUTTON
25. PLAY/PAUSE BUTTON
26. STOP BUTTON
27. VOL + BUTTON
28. BASS + BUTTON
29. VOL - BUTTON
30. BASS - BUTTON
31. FOLDER UP BUTTON
32. PROG BUTTON
33. FOLDER DOWN BUTTON
34. MIN BUTTON
35. MUTE BUTTON
36. CLOCK BUTTON
POWER SUPPLY
BATTERY OPERATION
1. Remove the battery compartment cover gently.
2. Install 8 x 'D' size batteries (UM-1 or equivalent) while observing the correct polarities.
3. Replace the battery compartment cover.
NOTE:
The AC cord must be detached from the AC socket of the player.
Leaking batteries may damage the battery cabinet and the player as a whole, so they should be
removed from the cabinet when becoming flat or when the player is not to be played on batteries for
some time.
AC OPERATION
Insert the AC cord to the AC socket of the player, and plug the other end to an applicable wall outlet.
NOTE: If the AC plug of this unit does not fit in with your AC outlet, a plug adaptor should be used.
Consult your local dealer on the type of plug adaptor.
NOTE: During playback, if not any operation in about 4 hours, the unit will switch to standby mode
automatically.
BACKUP POWER FOR CLOCK
Two AA/R6 size batteries are required for the backup power for the clock. Follow the instructions of
"BATTERY OPERATION" to install the batteries.
STEREO HEADPHONES JACK
A stereo headphones jack has been provided at the back of the unit so that you can enjoy music without
disturbing others. To use this jack, plug in the headphones/earphones (3.5mm in diameter, not included)
and adjust the volume to a comfortable level.
NOTE: When external headphones/earphones are connected, the sound to the unit's main speakers
will be made mute.
AUX IN
Follow below steps to connect the unit to another audio device like MP3 player and the like:
1. Connect the Phones jack of the MP3 player or Audio Out jack of other audio device to AUX IN jack
with audio cable.
2. Press STANDBY button to turn the unit on.
3. Press FUNCTION button on the unit repeatedly or press AUX IN button on the remote to switch the
unit to AUX mode.
4. Power on the device and begin playback.
To PHONES jack