Lenco SCD-1000 - Manual (Page 4)

GB-6 GB-7
SKIP TRACKS AND SEARCH FOR A SPECIFIC POINT TO PLAY
1. Press once NEXT button in music play to skip to the next track. To skip to a specific track ahead,
press this button several times.
2. Press PREVIOUS button once to play the current track from the beginning again, press the button
twice continuously to skip to the previous track. To skip to a specific track at back, press this button
several times.
3. Hold FAST FORWARD button in music play to search at quick rate for a specific point to play.
4. Hold FAST BACKWARD button in music play to search at quick rate for a specific point to play.
REPEAT A SINGLE TRACK
To repeat a preferred track in playback, press REP button once, "TRK REPEAT" shows in the LCD.
Then select the preferred track using NEXT/PREVIOUS button. The unit will repeat the chosen track
until you press STOP button.
REPEAT ALL TRACKS
To repeat all tracks, press REP button twice in play mode, "REPEAT ALL" shows in the LCD. The player
will repeat all tracks until you press STOP button.
RANDOM PLAY
Random play is that tracks on the disc are played by the unit at random. Press RAN button to enter this
mode during play, "RANDOM" shows in the LCD. Tracks on the disc will be selected at random for
playback and the player stops automatically after all tracks are played.
Note: The REP&RAN buttons also work at pause&stop mode, if enter the repeat modes, or random
mode at pause&stop mode, it is necessary to press PLAY/PAUSE button to start the playback.
MP3-CD PLAYBACK
1. Load the MP3 disc onto the unit following the instructions of "LOAD A DISC".
2. Press the FUNCTION button on the unit repeatedly or press CD button on the remote to switch the
unit to CD mode. "READING" shows on the screen to indicate at CD mode.
3. After an MP3-CD is successfully read, the total number of the folders and tracks shows in the LCD.
And then, playback begins from the first track of the first folder.
4. Press ID3 button to enable or disable the ID3 function. The LCD will show the corresponding
information of the current track at ID3 on mode.
5. During playback and while ID3 is off, press DISPLAY button to check the remain time of the current
track.
EXTERNAL MEMORY MEDIA OPERATION (USB/CARD)
1. Power on the unit.
2. Insert an USB data traveller into the USB port OR Insert a MMC/SD card into the card slot; press
FUNCTION button on the unit repeatedly or press CARD button/ USB button on the remote to switch
the unit to card or USB mode respectively.
3. After the inserted USB or card is successfully read, the total number of the folders and tracks shows
in the LCD. And then, playback begins from the first track of the first folder.
4. Press ID3 button to enable or disable the ID3 function. The LCD will show the corresponding
information of the current track at ID3 on mode
5. During playback and while ID3 is off, press DISPLAY button to check the remain time of the current
track.
SKIP TRACKS AND SEARCH FOR A SPECIFIC POINT TO PLAY (MP3/USB/CARD)
1. Press once NEXT button in music play to skip to the next track. To skip to a specific track ahead,
press this button several times.
2. Press PREVIOUS button once to play the current track from the beginning again, press the button
twice continuously to skip to the previous track. To skip to a specific track at back, press this button
several times.
3. Hold FAST FORWARD button in music play to search at quick rate for a specific point to play.
4. Hold FAST BACKWARD button in music play to search at quick rate for a specific point to play.
5. Press FOLDER UP/DOWN button to select your desired folder for playback.
REPEAT A SINGLE TRACK (MP3/USB/CARD)
To repeat a preferred track in playback, press REP button once, "TRK REPEAT" shows on the LCD.
Then select the preferred track using NEXT/PREVIOUS button. The player will repeat the chosen track
until you press STOP button.
REPEAT A FOLDER (MP3/USB/CARD)
To repeat a preferred album in playback, press REP button twice, "FOLDER REPEAT" shows on the
LCD. Then select the preferred track using NEXT/PREVIOUS buttons. The player will repeat the
chosen folder until you press STOP button.
REPEAT ALL TRACKS (MP3/USB/CARD)
To repeat all tracks, press REP button thrice in play mode, "REPEAT ALL" shows in the LCD. The
player will repeat all tracks until you press STOP button.
RANDOM PLAY (MP3/USB/CARD)
Random play is that tracks on the disc are played by the unit at random. Press RAN button to enter this
mode during play, "RANDOM" shows in the LCD. Tracks on the disc will be selected at random for
playback and the player stops automatically after all tracks are played.
Note: The REP&RAN buttons also work at pause&stop mode, if enter the repeat one/all modes, or
random mode at pause&stop mode, it is necessary to press PLAY/PAUSE button to start the playback.
PROGRAMMED PLAY (CD/MP3/USB/CARD)
Programmed play is that tracks can be edited for playback in a preferred order with the use of PROG
button.
1. At stop mode, press PROG button once, "MEMORY" shows on the LCD with a flickering track
number and the program sequence indication "P01".
2. Select the first track to be programmed using NEXT/PREVIOUS buttons, and press PROG button
again to store and advance to the next programming step. The program sequence indication
changes to "P02" waiting for your next input.
3. Repeat the steps above to program more tracks. A maximum of 20 tracks for CD and 99 tracks for
USB/card/MP3 can be programmed in memory in a preferred order.
4. Press PLAY/PAUSE button to begin programmed play in the preferred order after you are done with
programming.
5. You may press STOP button to terminate programmed playback. At program stop mode, press
PLAY/PAUSE button to begin the programmed playback with the programming order identical with
the previous one done; press STOP button again to clear the programming.