Lenco WPR-060 - Manual (Page 6)

10
Care and Maintenance
Resetting the Unit
If the unit is subjected to a severe power surge or electric shock, it is possible
that the internal microcontroller may “lock up” and the unit will not respond to
any commands from the top panel controls.
Use a straightened paper clip, toothpick, or similar blunt object to press the
RESET button located at the inner bottom of the main unit (see figure below).
The reset operation clears the system memory and all of your previous
settings will be erased.
Caution: DO NOT use a sharp, pointed object to press the RESET button.
It may damage the reset switch inside the unit.
• Do not subject the unit to excessive force, shock, dust or extreme temperature.
• Do not tamper with the unit's internal components.
• Clean your unit with a damp (never wet) cloth. Solvent or detergent should
never be used.
• Avoid leaving your unit in direct sunlight or in hot, humid or dusty places.
• Keep your unit away from heating appliances and sources of electrical noise
such as fluorescent lamps or motors.
RESET button
11
eng eng
Sleep Timer
The Sleep timer allows you to set the unit to automatically turn off the Radio, USB ,
SD/MMC music playback after a selected sleep time.
- To activate the sleep timer and select the sleep time, press the Sleep button
repeatedly. The sleep time available for choosing are : 15, 30, 45, 60, 90 and
120 minutes. The display will show the " sleep " indicator .
- To switch off the sleep timer, press SLEEP button repeatedly until the "sleep"
indicator disappears on display.
- To switch off the unit before the selected sleep time, press the POWER
button once.