Lenco TFT-1021 User Manual
Page 17
If any program is detected and the scanning process is finished, at the same time return and play them.
Also you can press ENTER to open the submenu, as shown in Figure 3.15:
Figure 3.15
3. Area Search
Area search is a kind of intelligent and convenient mode of programs searching, which covers programs
of all frequent points of target countries or regions.
At present, this system covers many targets countries and regions including: Germany/ England/ Italy/
France/ Spain, etc.
You can move the cursor to “Area Search” via press ▲▼key under Installation menu, then press ENTER
to enter into area searching page, as shown in Figure 3.16
Figure 3.16
1． After entering into area search page, system will scan all programs one by one under frequency points
of current countries or regions selected automatically.
2． During scanning, press Menu/Exit to stop and exit scanning.
3．
If any program is detected and the scanning process is finished, system will exit the scanning page
and save the program, at the same time return to the “installation menu” and to play them in a small
13