Lenco TFT-1021 - Manual (Page 31)

The screen is close and power
LED is on. Battery exhausted.
Change battery.
The remote control is not working. Battery exhausted.
Remote control is incorrectly
aimed Change battery.
Aim the remote control at
box.
Check that nothing blocks
the front panel.
Don’t display the subtitle
The program signal no subtitle
date
The subtitle don’t open or
signal is too weak Try press the S.TIT button
open the subtitle.
Make sure the signal is good
When the machine tries to find
and store channels you get the
message “No signal”
When only very few of the
expected number of channels are
found. The aerial is not properly
connected to the machine.
The aerial is not correctly
directed towards the trans-
mitter.
The aerial is not suitable for
digital channels.
The signal is too weak for the
connected aerial.
There are no terrestrial
digital transmissions in the
area. Check the aerial ins- tallation
including its connections.
Check that the aerial is
directed towards the trans-
miters.
Check that digital trans-
missions are available in the
area.
If things does not work out as
they should, let the local TV
dealer check whether the
aerial is intended for
receiving digital trans-
missions or not. If not you
have to exchange the aerial.
During the channel searching
process, the buttons or remote
controller’s keys are insensitive. Since the channel searching
process use a lot of system
resource, the system scan
keys or buttons will become
very slow.
Try press buttons or remote
controller’s keys several
times.
Can’t play the music file correctly
Can’t play the video. The file is damaged or code is
wrong
The format of the video doesn’t
compatible or file has
damaged. Change the right files.
The max bit-rate of the video
is 8Mbps.
Picture or video doesn’t full screen
The resolution of the files not
suitable
Change the files
27