Lenco XEMIO-261 - Manual (Page 9)

6. Press Mode to confirm the type selected
7. Press Play to start recording
 Recording Type:
6. Play Recorded Files
1. Enter main menu.
2. Push Next to select “Voice mode”.
3. Press Mode to enter Voice mode interface.
4. Press Play to start playing.
5. Select recorded files:
Pre: to select the previous recorded file
Next: to select the next recorded file
 Convert ACT Files to WAV Format Files
The ACT format files can be converted to WAV format files through the accessory installation tools.
1. Run “Sound Converter” program, and click “Open” button.
2. Choose the ACT files for format conversion.
3. Click “Convert” button, the conversion starts.
Besides the conversion from ACT to WAV, the accessory tool can also play WAV and MP3 files.
7.Browse of JPEG
a. File selection:
Enter the file selection
Press the “play” button and browse JPEG
Press the “Next/Last” button to selects the next/last file.
Press the “mode” button, enter the stop submenu:
1.local folder 2.play set 3.delete 4.exit
Play set: manual play and auto play
Auto play: you can set the page turning time from 1 sec. to 8sec.
b. Browse picture