Lenco XEMIO-760 BT - Manual (Page 20)

20
memory card slot on side of player.
Turn On the player and now the Micro SD memory card, T-Flash, is ready
to use.
When Micro SD Card has been inserted, then two items “Local Folder”
and “Card Folder” will be existed for choose.
Go into the card folder and choose you desired folder(s) and file(s) to
play.
To take out the Micro SD memory card, please turn Off the player before
you do.
R.
Reset Device
In some circumstances, the device may encounter dead halt during use.
This device has design with built-in a mini tact switch which located at the
behind of the earphone jack, so it can provide reset function to restart the
device by pass through the earphone jack hole.
To Reset:
Use a 2mm stick or similar object (like tooth stick), and carefully insert
the stick, use dull side, into the earphone jack hole until you feel to hit
the end. Actually that is the tact switch button surface.
Then add a bit of force and you will get a click sound and feeling return
from switch. The device is reset and restart in seconds.
Important: Do not reset the device if it is proper working.
S.
Trouble Shooting
Unit cannot turn ON * Check battery is it charged with enough energy.
No sound is heard
from headphone.
*Check whether Volume is set “0” and connect the
headphone plugs firmly.
*Check whether the headphone plug is dirty.
*Corrupted MP3 may make a static noise and the
sound may cut off. Make sure that the music files are
not corrupted.
Characters in LCD
are corrupted *Check whether the right language has been
selected.
Download of media
files fails. *Check whether USB cable is damaged and is
connected properly.
*Check whether driver is installed correctly.
*Check whether the player’s memory is in full.
Bluetooth can’t pair
and connect to a
Bluetooth
receiver
device
*Make sure Bluetooth receiver supports A2DP.
*Make sure Bluetooth receiver is placed within
connection distance in 5 – 10 meters.
*Make sure Bluetooth receiver has already entered
into pairing mode.