Lenco XEMIO-760 BT - Manual (Page 9)

9
disconnect or un-pair it, also can re-connect those devices if it’s in
operating range.
In device’s list, choose the device’s name and choose you desired
function “Disconnect” or “Connect / Unpair” as you want. However,
make sure that you have disconnected the linking device before connect
the new wanted device.
Reconnect a pair Bluetooth device;
Automatically connecting: every time when turn “On” the Bluetooth
transmission function, it will automatically reconnect to the last
connected device if the receiver device is still in reconnect mode.
However, some Bluetooth receiver device may need to turn it “Off and
On” again for reconnecting. If not;
Manual connecting: some Bluetooth receiver device may need to
reconnect manually; turn it power Off and On again for reconnecting. Or;
Choose “Device’s List” again by using / and buttons, then
choose the known device and choose “Connect” for reconnecting.
c.
All Music
Choose “All Music” to enter into music list, you can direct select the
wanted music for play and transmitting by using / and
buttons
d.
BT Now Playing
Choose “BT Now Playing” to return now playing interface.
In “BT Now Playing” interface, you can selects; Previous / Next song file,
Play / Pause the song and adjust the Volume Up/Down by using the /
, and / buttons.
To Recall the Bluetooth’s Submenu / Exit Bluetooth Function
Press button, to recall the Bluetooth’s submenu. Or,
Pressing button until a “Exit BT Transmission?” dialog appear for
confirm. Choose “Yes” to exit by using / and buttons, the
Bluetooth function will turn Off and return to main menu screen. Choose
“No” to abort.
Bluetooth Function Limitation:
1.
When you turn the player into Bluetooth audio transmitting mode, the
player earphone output sound will turned to Off automatically;
2.
OGG & ACE are not support for Bluetooth audio transmission function.