Lenco XEMIO-858 - Manual (Page 17)

• Tap icon to show all saved radio frequency channels by “Auto Search” and “Manual Search”. A
list screen appears to choose.
•
To select your desired radio station, tap / icon to move the list page down / up. Or, drag the
progress bar to adjust the page down / up, the bar dot will move to the progress bar where you
have drag.
•
Once selected, tap you desired radio channel / frequency, example “CH03 : 90:30 MHz”, to enter the
radio station. The selected radio frequency is show and radio station is receiving.
• To change another stations, tap icon again or direct tap or icon to change the station(s)
down and up according to channel list.
To Delete Station
•
Select the receiving the unwanted station by tapping or icon, and then tap icon, a delete
station dialog box appears to confirm. Choose “Ok” confirm the delete or choose “Cancel” to abort. Or,
• Tap icon to enter to channel list, and then select the channel station you want to delete, tap icon
and choose “Ok” to confirm.
Change Volume
•
Press or press and hold / button to increase / decrease volume levels.
• Or, direct tag the volume bar to adjust the volume levels.
Mute Radio
•
To mute the radio, tap icon and it will change into , the sound is mute.
• To un-mute, tap icon and icon will change into , the sound is up again.
Use FM Record
• Select you desired station, tap icon to enter to record mode.
Start Recording and Pause Recording
•
To start recording, tap icon and it will change into .
•
To pause the recording, tap icon to pause the recording and icon will change into .
To Save Record Voice File
• Tap icon to save the current recording voice file into memory, the “Saving File…” dialogues box
appears for few seconds. The file is saved.
To Review and Playback Voice File
•
Tap icon, a files list appears; all the recorded voice file(s) are show for view. Tap a desired
voice file to play if you want it to.
Change Record Setting (Quality and Volume)