Lenco XEMIO-955 - Manual (Page 18)

2.
Record Tool Bar
• Tap / icon to switch between Start / Pause during in recording mode.
• Tap icon to stop the recording, a confirmation dialog box will appear; tap “OK” to
confirm, the recording is stop and the recorded file will save to the system defaulted folder
automatically. (Internal Memory:\ROOT\RECORD\MIC\). Or, tap “Cancel” to exit and back
to recording mode.
• Tap / / icon to switch between the Record Quality “Low / Medium / High” as
you desired.
• Tap icon to change the Record Gain, choose “1 / 2 / 3 / 4 / 5” as you desired. (high
number will increase the record gain)
• During in recording mode, tap icon to stop the recording, a confirmation dialog box will
appear; tap “OK” to confirm, the recording is stop, the recorded file will save to the system
defaulted folder automatically and the screen will switch back to desktop menu directly.
• Tap “Cancel” to exit and back to recording mode.
3.
Record Setting Menu
•
In stop mode, tap icon to setup the record setting “<Record Format>, <Save Path>”.
•
Tap “Record Format” to set the format of record files “wav / mp3” as you desired.
•
Tap “Save Path” to change the default folder location, options include “Internal Memory”
and “Card Memory”. It just shows Internal Memory if no card is plugged in.
• Tap “Back” to exit.
Note: The Save Path default location; for Internal Memory: \ROOT\RECORD\MIC; for Card
Memory: \ROOT\RECORD\MIC.
M.
Radio
• In desktop menu, tap “FM Radio” to enter the FM Radio interface. It will prompt if there is no
earphone plugged in. (no see this msg)
• Tap icon to return to desktop menu. Or, press “MENU” button