The spi eeprom tab, The spi eeprom tab –13, Address display –13 write –13 – Altera MAX V CPLD User Manual
Page 27
Advertising
Chapter 5: Board Test System
5–13
Using the Board Test System
January 2011
Altera Corporation
MAX V CPLD Development Kit User Guide
The SPI EEPROM Tab
This tab (
Figure 5–10
) allows you to read and write 1-K data to a user self-mounted
SPI EEPROM located at U6 on the development board.
1
EEPROMs are not included with the MAX V CPLD Development Kit. This test is
designed for a Microchip Technology EEPROM in the TSSOP-8 package. For more
information on the recommended EEPROMS, refer to the
The following sections describe the controls on the SPI EEPROM tab.
Address Display
Displays addresses of the SPI EEPROM.
Write
Writes all of the current 1-Kb data to the SPI EEPROM.
Figure 5–10. The SPI EEPROM Tab
Advertising