Get_write_data_cycle(), Axi3 bfm, Axi4 example – Altera Mentor Verification IP Altera Edition AMBA AXI3/4TM User Manual
Page 483
VHDL AXI3 and AXI4 Slave BFMs
get_write_data_cycle()
Mentor VIP AE AXI3/4 User Guide, V10.2b
463
September 2013
get_write_data_cycle()
This blocking AXI4 procedure waits until the write data channel WVALID signal is asserted.
AXI3 BFM
Note
The get_write_data_cycle() procedure is not available in the AXI3 BFM.
AXI4 Example
// Wait for the WVALID signal to be asserted.
bfm.get_write_data_cycle(bfm_index, axi4_tr_if_0(bfm_index));
Prototype
procedure get_write_data_cycle
(
bfm_id : in integer;
path_id : in axi4_adv_path_t; --optional
signal tr_if : inout axi4_vhd_if_struct_t
);
Arguments
bfm_id
BFM identifier. Refer to
“Overloaded Procedure Common Arguments”
on page 203 for more details.
path_id
(Optional) Parallel process path identifier:
AXI4_PATH_5
AXI4_PATH_6
AXI4_PATH_7
“Overloaded Procedure Common Arguments”
on page 203 for
more details.
tr_if
Transaction signal interface. Refer to
on page 203 for more details.
Returns
None