Altera PCI Development Kit, Cyclone II Edition Getting Started - Manual (Page 14)

2–4 Core Version a.b.c variable Altera Corporation
PCI Development Kit, Cyclone II Edition Getting Started User Guide May 2005
Software Installation
Software
Installation The instructions in this section explain how to install the following:
■ PCI Development Kit, Cyclone II Edition CD-ROM
■ The Quartus II Software, Development Kit Edition, including MegaCore
functions from the MegaCore IP Library CD-ROM
Installing the PCI Development Kit, Cyclone II Edition CD-ROM
Contents
The PCI Development Kit, Cyclone II Edition CD-ROM contains the
following items:
■ PCI Development Kit, Cyclone II Edition application and drivers
■ PCI-to-DDR2 reference design and configuration files
■ PCI Development Kit, Cyclone II Edition Getting Started User Guide (this
document)
■ Cyclone II EP2C35 PCI Development Board Reference Manual
1 Before you can compile the PCI-to-DDR2 reference design, you
must install the MegaCore IP Library CD-ROM.
■ AN 390: PCI-to-DDR2 SDRAM Reference Design
■ Board manufacturing files
To install the PCI Development Kit, Cyclone II Edition CD-ROM, perform
the following steps:
1. Insert the PCI Development Kit, Cyclone II Edition CD-ROM into your
CD-ROM drive and double click the cycloneii_pci_kit-v1.0.0.exe
file.
2. Follow the online instructions to complete the installation process.
The installation program copies the PCI development kit files to your
hard-disk, installs the software driver and application, and creates an
icon in Programs > Altera > MegaCore > PCI Development Kit,
Cyclone II Edition v1.0.0
(Windows Start menu), which you can use to
launch the Windows development kit application and view the kit’s
documentation.
When the installation is complete, the PCI Development Kit, Cyclone II
Edition installation program creates the directory structure shown in
Figure 2–1 , where <path> is the PCI Development Kit, Cyclone II Edition
CD-ROM installation directory.