Pci master loop (debug tab) – Altera PCI Development Kit, Cyclone II Edition Getting Started User Manual
Page 23
Advertising
Altera Corporation
Core Version a.b.c variable
2–13
May 2005
PCI Development Kit, Cyclone II Edition Getting Started User Guide
Getting Started
PCI Master Loop (Debug Tab)
In this example, a PCI master read is followed by a PCI master write
transaction. The kit’s application verifies that the data read and written
by the master is the same.
1.
Ensure that the Debug tab is active.
2.
Select Master Loop from the Commands box.
3.
Keep the Address Offset setting of 0x0000000.
4.
Specify the following settings in the Address/Size box:
●
Transfer Length: 4096
●
Iterations: 2
5.
In the Data Type list, select AA55 Packet.
6.
Click Execute.
7.
Review the results in the Display Window (see
).
Figure 2–7. PCI Master Loop (Debug Tab)
Advertising